In order to continue using the MV utility, we had to leave the PC-cillin firewall off (though our router's firewall was still up and running). With the PC-cillin firewall turned on, the Media Vault utility couldn't find the drive again, although we were still able to access it because we had mapped the folders on the drive. We turned off the software firewall to finish installation, then turned it back on once we were done. HP's support documentation indicates a known problem with Norton's firewall, but we ran into the same problem using a PC-cillin firewall. Second, you may need to turn off any software firewalls on your PC. First, the DHCP server on your router needs to be enabled. (If you choose to skip this step, you can also map the drives later using Windows XP.) There are a couple of things to keep in mind for a successful installation. During the installation process, you'll be prompted to map a drive letter to each of the shared folders on the Media Vault. Then install the backup and restore software and the Media Vault utility from the included CD. Power it up and wait to see that the power and network lights are properly lit. Installing the Media Vault is a simple process: Plug the drive in and connect it to one of your router's LAN ports using an Ethernet cable. Alternatively, you can use the USB ports to attach additional external hard drives. The built-in print server lets you network any compliant printer using the USB ports-as many as three printers. On the back are two additional USB 2.0 ports, a Gigabit Ethernet port, and a power port. A black-plastic door conceals the empty drive bay, and a lone power button graces the bottom of the device's face. Its design is spare: on the front is a series of lights for power, network connection, and disk activity, and a single USB 2.0 port. The silver-and-black Media Vault looks a lot like HP's own Slimline desktops. And even better, the HP Media Vault is quick with data transfers, making it an excellent option for the networked home user with tons of digital data and the desire to share it. ![]() ![]() Still, since the HP Media Vault lets you choose what drive to put in the second bay, you could easily create a 1TB drive for less than $900 by finding a good deal on a hard drive. Though both Media Vault models represent a reasonable per-gigabyte price, the Buffalo TeraStation Home Server is slightly less expensive per GB, with a 1TB drive retailing for about $900, and there are larger sizes available. The Media Vault can stream audio and video to any UPnP-compliant digital media adapter and comes with backup and restore software, a pre-installed full-length movie, and two free movie downloads from CinemaNow. Both drives ship with a single hard drive and an empty bay to add a second drive for more capacity or a RAID 1 array. The drive is available in two capacities: the 300GB Media Vault mv2010 costs $380, and the 500GB mv2020 costs $550. Despite its consumer-friendly name, the HP Media Vault is essentially a network-attached storage (NAS) drive with media-streaming capabilities.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |